C9300-24T-EDU Cisco Catalyst 9300 Managed Switch – 24 Ports
C9300-24T-EDU Overview
The Cisco Catalyst 9300 series represents a high-performance, stackable switching solution designed to meet the demands of security, IoT, and cloud applications, ensuring robust connectivity and management capabilities.
4,099.00 AED
C9300-24T-EDU Technical Specifications
Cisco Catalyst 9300 Managed Switch – 24 Ports
Slot Provided
Free Qty: 1
Total Qty: 1
Type: Expansion slot
Interface Provided
Connector Type: RJ-45
Qty: 24
Type: 1000Base-T
Qty: 1
Type: USB 2.0
Networking
Compliant Standards: IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3u, IEEE 802.3x
Features: 16MB packet buffer, three fans, 802.1x authentication, ACL support, Cisco StackPower and StackWise-480 technology, control plane protection (CoPP), Flexible NetFlow, FTP client, full duplex mode, integrated Wireshark, MIB, private VLAN, QoS, RSPAN, SSM, STP support, trunking, Q-in-Q, and WRED.
Form Factor: Rack-mountable
Jumbo Frame Support: 9198 bytes
MAC Address Table Size: 32,000 entries
Manageable: Yes
Ports Qty: 24
Remote Management Protocol: CLI, NETCONF, RESTCONF, RMON 1, RMON 2, SNMP 1, SNMP 2c, SNMP 3
Routing Protocol: IGMP, IS-IS, OSPF, OSPFv3, PIM-SM, PIM-SSM, policy-based routing (PBR), RIP-1, RIP-2, RIPng, VRRP
Stackable: Yes
Status Indicators: Status
Miscellaneous
Color Category: Gray
Compliant Standards: AS/NZS 3548 Class A, BSMI Class A, CAN/CSA C22.2 No. 60950-1, CCC, CISPR 22 Class A, CISPR 24, EN 300386, EN 55022 Class A, EN 60950-1, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-6-1, EN50082-1, EN55024, FCC CFR47 Part 15 A, ICES-003 Class A, IEC 60950-1, RoHS 5/6, TVCN 7317, UL 60950-1, VCCI Class A, VCCI V-3/2009 Class A
Encryption Algorithm: 128-bit AES
Height (Rack Units): 1
MTBF: 314,790 hours
Pricing Type: K-12 education
Environmental Parameters
Humidity Range Operating: 5 – 90% (non-condensing)
Humidity Range Storage: 5 – 90% (non-condensing)
Max Operating Temperature: 113 °F
Max Storage Temperature: 158 °F
Min Operating Temperature: 23 °F
Min Storage Temperature: -40 °F
Header
Brand: Cisco
Manufacturer: CISCO DS HARDWARE DIRECT
Model: 9300
Packaged Quantity: 1
Product Line: Cisco Catalyst
Power Device
Frequency Required: 50 – 60 Hz
Hot-Plug: Yes
Installed Qty: 1
Max Supported Qty: 2
Nominal Voltage: AC 120/230 V
Power Provided: 350 Watt
Power Redundancy: Optional
Type: Internal power supply
System Requirements
Min Operating System: Cisco IOS Universal
Dimensions & Weight
Depth: 17.5 in
Height: 1.7 in
Weight: 16.03 lbs
Width: 17.5 in
Capacity
Type: Flexible NetFlow entries
Value: 64,000
Type: IPv4 routing table entries
Value: 32,000
Type: IPv6 routing table entries
Value: 16,000
Type: Switched virtual interfaces (SVIs)
Value: 2,000
Type: VLAN IDs
Value: 4,000
Flash Memory
Installed Size: 16 GB
Performance
Type: Forwarding rate
Value: 154.76 Mpps
Type: Stacking bandwidth
Value: 480 Gbps
Type: Switching capacity
Value: 128 Gbps
Ports
Qty: 24
Type: 10/100/1000
RAM
Installed Size: 8 GB
Related Products
C1-C4500X-32SFP+ Overview
The C1-C4500X-32SFP+ is a Cisco ONE Catalyst 4500-X switch, closely resembling the WS-C4500X-32SFP+. The key distinction is its support for Cisco ONE™ Software, enhancing its capabilities. This software offers vital advantages, including ongoing innovation access, investment protection for software purchases, attractive software suites, and flexible licensing models for budget management.
Cisco CAB-SPWR-30CM
The Cisco CAB-SPWR-30CM Stack Power Cable, measuring 30 CM, is designed to be both sturdy and flexible. It transmits power and data signals, ensuring communication between switches in a power stack. With color-coded ends, it simplifies connection management. This cable is compatible with Catalyst 3750-X switches and XPS, facilitating efficient power distribution.
C9300-24P-E Overview
The Cisco Catalyst 9300 24-Port Gigabit PoE+ Switch delivers an enterprise-level networking solution, ideal for demanding applications. Equipped with 24 Gigabit Ethernet ports that support Power over Ethernet Plus (PoE+), it provides up to 30W per port, allowing direct power to devices like IP phones and access points, thus simplifying cabling and eliminating the need for separate power supplies.
WS-C3650-24TD-S Overview
The Cisco Catalyst® 3650 Series represents the evolution of enterprise-class access-layer switches, integrating seamless wired and wireless connectivity on a single platform. Built on advanced Cisco StackWise®-160 technology, it supports robust policy enforcement, application visibility, and enhanced resilience. With full IEEE 802.3at PoE+ support, this switch is designed to optimize wireless productivity while minimizing total cost of ownership.
WS-C3650-24PD-S Overview
The Cisco Catalyst® 3650 Series represents the latest in enterprise-class standalone and stackable access-layer switches, designed to provide a unified platform for both wired and wireless connectivity. Built on the advanced Cisco StackWise®-160 technology, this switch supports IEEE 802.3at Power over Ethernet Plus (PoE+) and features modular, field-replaceable fans and power supplies.
WS-C2960S-24PS-L Overview
The WS-C2960S-24PS-L model excels with its Power over Ethernet (PoE) capabilities. It features a total of 370W fixed power supply options, supporting up to 12 ports at 30W each or 24 ports at 15.4W, making it ideal for various network setups.
EX4200-24F-DC Overview
The EX4200 Ethernet Switch offers a compact, fixed-configuration solution ideal for campus setups and 1GbE access environments in data centers. It combines the reliability of modular solutions with the flexibility of stackable switches, providing high-performance switching for various deployments.
WS-C4510R-E Overview
The Cisco Catalyst 4510R-E chassis, designed for both Power over Ethernet (PoE) and non-PoE environments, is perfect for high-density wiring closets and branch offices. With support for redundant supervisors, it ensures minimal downtime. This chassis is compatible with all classic and E-Series line cards from the Cisco Catalyst 4500 Series.
WS-C2960X-48FPS-L Overview
Experience robust network management with the Cisco Catalyst 2960-X. Utilizing 802.1X for port-based access control, it enables dynamic role-based access through Cisco TrustSec Technology, safeguarding against IPv6 address theft and various cyber threats with IPv6 First Hop Security.
C1-C2960X-24TS-L Overview
The Cisco ONE Catalyst 2960X-24TS-L is a managed switch designed for efficient network management, featuring 24 Ethernet ports and 4 Gigabit SFP ports for versatile connectivity.
WS-C3650-48TS-S Overview
The Cisco Catalyst® 3650 Series represents the latest evolution in enterprise-class standalone and stackable access-layer switches, enabling seamless convergence of wired and wireless networks on a unified platform. Built on the innovative Cisco StackWise®-160 technology, this switch leverages the advanced Cisco® Unified Access Data Plane (UADP) ASIC to deliver enhanced policy enforcement, application visibility, and exceptional resilience.
juniper EX3400-48T
The EX3400-48T features 48 ports of 10/100/1000BASE-T connectivity, alongside 4×1/10G SFP/SFP+ and 2x40G QSFP+ ports, making it ideal for high-performance networking.
